19 lutego 2025 - Amazon
The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs. The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place. The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary. Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.
Odkryć Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 Degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop28 lutego 2024 - Amazon
Odkryć Karbalu 13x6 Deep Wave Lace Front Wigs Human Hair Pre Plucked 13x6 HD Lace Front Wigs Human Hair 180% Density Glueless Wigs Human Hair with Baby Hair Deep Curly Wigs Human Hair Natural Color 24 Inch28 lutego 2024 - Amazon
Wiha 61606 composite laminted ruler metric/inch, 10 sections. Outside reading inch, inside reading metric. Play free precision joints and 90 stops. Maintenance free, won't rust or kink. High visibility deep embossed scales. Metric and inch or double sided metric. Swiss made precision Wiha quality.
Odkryć Composite Laminated Ruler Inch & Metric28 lutego 2024 - Amazon
Odkryć Homesen Alicate de crimpagem de terminais de catraca de engenharia profissional Homesen Alicate de crimpagem de fios Decapadores de cabo Ferrule Ferramenta de crimpagem de terminais de cabo Kit de ali28 lutego 2024 - Amazon
Veneer or laminates are the ideal way to change the appearance of a project with infinite design possibilities that are not typically available to us when using solid wood. The Fulton Long Handle J-Roller is the perfect tool for applying veneers and laminates as it enables the operator to apply even pressure to the material, thus providing maximum glue-adhesion. This J-Roller features a 1-1/2” diameter by 2-7/8” wide non-marring rubber roller and measures 12” in total length. The heavy duty aluminum handle has two comfortable vinyl grips that are positioned just right for optimal leverage
Odkryć Fulton Long Handle J Roller with Thick Rubber Roller 1-1/2” in Diameter by 2-7/8” Wide for Veneers Laminate Wall Coverings and Edge Banding for Maximum Pressure Adhesion